TRUCK EXPLORER CHIPTUNING


Read/Write MB PLD(MR) Flash, EEPROMs by OBD2 or DirectConnect cable;

 

      

 

Read/Write MB MCM (ACM) Flash & EEPROM by DirectConnect cable;
DirectConnect cable;
Read/Erase fault codes;
Full Fault errors report;
Set Torque or Speed limit.

Includes hardware: VEI device, MB round adapter, DirectConnect cable, MCM/ACM adapter, USB cable.
Includes software: MB MEMO, 2011+, 3Core, DC, DIAG, EXTRA.
Support and updates for 12 months is included.

 

1. License MB MEMO

Program module for Read & Write FLASH & EEPROMs of engine control module PLD/MR based on microprocessor C167 without internal flash. This function allows make clone of MR memory. Your read one MR, save to *.bin file (RAW format and not crypted, scrambled) , and write it to another MR memory. Software module (MB MEMO) is especially useful for chip-tuning work and recovering unit after broken update.

Function available thru OBD connection (MR is mounted inside truck what have known gateway FR/CPC / ADM / VCU / GM / INS) or direct connection with DirectConnect cable (MR connected on the table, external power supply required). OBD connection support firmware access mode only. DirectConnect connection type support firmware and BSL (Boot Strap Loader) mode. For some PLD BSL mode require PLD cover disassembling.
Software module include automatic cheksum (main aplic. and fuel map) recalculation

2. License 2011+

For PLD memory read and write operation (category memo) PLD with XC2287 secured microprocessor.
Open access Read & Write memory for PLD, made on 2011 and later, with microprocessor Infineon XC2287.
Software module support PLD with firmware versions: 22B, 23E, 24B.
Doesn’t support PLD what have firmware versions: 21x, 23F, 24C, 25x, 26x these version covered by additional license.

3. License 3CORE

Provide Read & Write full access for MCM and ACM control units memory over DirectConnect cable.
Type 1. Continental MCM1 (MCU TC1796-256F / TriCore  1 EEPROM M95128).
Type 2. Continental MCM2 (MCU TC1796-256F / TriCore  1 EEPROM M95640).
Type 3. Continental MCM2 (MCU TC1796-256F / TriCore  1 EEPROM M95640).

4. DC cable and license

DirectConnect cable to connect VEI to PLD directly.
This sub license cover different functions what work pass thru DirectConnect cable. Such memory operations, key programming, diagnostic for  electronics control units such MR/PLD; FR; CPC; FMR; FFR; PTM; EDC; ECM.

5. License MB DIAG

Diagnostic
It able to Read DTC with error description. Clear DTC. VANs on this moment not supported.  
Read and Erase fault codes.
 

6. License MB Extra

Set speed limit.
Set NOx torque limit.
  

Supported Mercedes PLD (MR):

1. Temic Euro2 PLD 1: (MCU C167CR, FLASH AM29F200AB, 1 EEPROM NM93C56)
2. Temic Euro2 PLD 2: (MCU C167CR, FLASH AM29F200BB, 1 EEPROM NM93C66)
3. Temic Euro3 PLD 1: (MCU C167CR, FLASH AM29F200BB, 1 EEPROM NM93C86)
4. Temic Euro3 PLD2: (MCU C167CR, FLASH AM29F400BB, 1 EEPROM NM93C86)
5. Temic Euro4-5 PLD: (MCU C167CR, FLASH AM29F400BB, 2 EEPROM NM93C86)
6. Continental Euro4-5 PLD: (MCU C167CR, FLASH AM29F400BB, 2 EEPROM NM93C86)
7. Continental Euro5 PLD: (MCU XC2287 (flash 768kB),  1 EEPROM M95640).
8. Continental Euro5 PLD: (MCU XC2287 (flash 768kB),  1 EEPROM M95640).
9. Continental Euro5 MCM (MCU TC1796-256F / TriCore  1 EEPROM M95128).
10. Continental Euro5 MCM (MCU TC1796-256F / TriCore  1 EEPROM M95640).


Truck Explorer includes 12 months Update and Support Service.
VEI device has 12 months warranty.